China Plastic Injection Molded Spare Parts for Intelligent Water Meter an injection molded parts

Merchandise Description

Plastic Injection Molded Spare Elements for Clever Drinking water Meter 

1. Design: OEM / ODM
2. Dimension: Customzied 
3. Shade: White, Black, Gray, Tailored colour.
four. Part Content: ABS
5. Features: Durable, Anti-freezing, UV resisted, 
six. Software: Piping & Plumping System Installation, Water Program Equipment

Drinking water Meter Parts


Plastic Injection Moulded Parts:
A variety of plastic material Pc, PA, POM, Ab muscles, Abdominal muscles+Personal computer, PE, PP, PS, PMMA, TPE,TPU… selected as per specific application.

Plastic Injection Moulds:
One & Multi Cavity Mould, Hot & Cold Runner Mould, Two-Shot Mould, Insert Mould, Above-moulding Mould, Unscrewing Mould, Gas Assisted Mould, Precision Mould.

A single-cease Service:
Eco-friendly Vitality offers a full spectrum services for planning and creating moulds, sustaining and managing moulds. We can aid from layout through final generation procedure for product development.
      * Totally free Quotation
      * Moldability Recommendation
      * CZPT Creating
      * Moulded Components Series Production

Quality Assurance:
The good quality handle method and administration technique are strictly carried out according to ISO9001:2015 method in Eco-friendly Vitality.
Eco-friendly Vitality uses professional form and graphics this sort of as BOM of mould, Weekly Report with pictures, Injection Parameter Report, Dimension Report and so on to handle all of tasks running method. 
Quality inspection recommendations are tailor-made to meet certain consumer specifications.

Business Profile:
Inexperienced Vitality Industry Co., Ltd has been devoted to the mold market since 1993.

With the contemporary business administration program and ISO 9001-2015 High quality System guideline, the sophisticated creation tactics, the modern manufacturing gear, and our experienced and dedicated crew, we are complete of capabilities in offering professional one particular-end remedy of CZPT developing, CZPT generating, injection moulding and outside of-benefit services.

We have established strategic partnership with our customers, and constantly increase top high quality moulds and plastic elements to preserve customers’ pleasure and accomplishment. Inexperienced Vitality is increasing up collectively with our customers.

About eighty% of moulds and plastic parts are exported to US, Spain, Germany, Norway, Australia, United kingdom, France, Italy and other countries around the world.

When you work with Eco-friendly Vitality, you will notice that:
— Signed Confidentiality Agreement to shield your proprietary information.
— Manufacturing unit immediate quotation with aggressive cost.
— In-house creation functionality for each moulds & plastic moulding areas.
— thirty many years expertise.
— Dedicated product sales group to communicate successfully.
— Design & Venture engineer team offer you scientific resolution to general project purpose.
— Help your plan.

Injection Workshop:
With diversity tonnage injection devices in-home, Inexperienced Vitality is CZPT to make tailor-produced plastic moulding elements of small, medium or big volume.
Bare minimum buy quantity start off from a hundred parts is very useful for the business newbies and early phase of new merchandise advancement.
Fully computerized robotic arms are used in plastic injection moulding process underneath 24 hrs nonstop mass manufacturing, which make generation much more efficient and economic.

Mould Workshop:
Our tooling workshop owns precision CZPT processing equipment. which allows us to develop tailored moulds compliant with the global requirements this sort of as LKM, DME, HASCO, Daido, Misum and so forth.
We design moulds depending on your annual manufacturing specifications, and moulds would be constructed to fill the capacity of your injection devices

Publish Processes:
You could count on Eco-friendly Vitality to source a “total, turnkey deal” by completing all essential assembly and packaging, resulting in a finished product sent immediately to you.
—-Item Surface Finish
— Custom made Logo Printed
— Product Assembly
— Custom made Labeling & Retailed Packaging



one. Are you a investing organization or a manufacturer?
    Inexperienced Vitality Sector is a CZPT producer with around thirty a long time encounters, we are happy to present images or vedio of our workshop, and welcome to visit our manufacturing facility.

2. Which variety of product can you make?
    Precision plastic injection CZPT & mass manufacturing for moulded plastic parts.

3. Do you help OEM?
    Of course, Green Vitality can create custom-made parts by complex drawings or samples, really earlier mentioned ninety% of our products are OEM.

4. If no 3D drawing or samples, how need to I start the new project?
    You can inform us your concept (sketch or photograph with sizes), we will help to finish the 3D drawing style.

5. How about the samples?
    We will make some samples for you to check out as soon as we end the mould, and then supply the samples for you to test.

six. How about the CZPT modification?
   You can notify us your suggestions right after you test the sample. If there is any dimension different from the drawing, we will modify the CZPT for totally free and then make the new samples.

7. How about the proprietary legal rights of the mold?
    The CZPT belong to the client who pay for it. Environmentally friendly Vitality Industry to maintain and keep the CZPT only for the buyer.

eight. What variety of trade phrases can you do?
     EX-Operates, FOB, CIF, DDU, DDP
9. What is your terms of payment? 
     For moulds: forty% deposit, mid term 40% on initial shot of sample, final 20% after samples verified but ahead of shipment. 
     For elements: 50% deposit, balance fifty% just before cargo.
10. How about your shipping and delivery time?
     Generally, it will take 40 days (thirty days for CZPT and ten days for mass creation), it depends on how intricate of the portion design and style and CZPT structure.


Inexperienced Vitality would usually maintain our assure to perform company truthfully !
Thank you for your Attention !


US $1-9
/ Piece
1,000 Pieces

(Min. Order)


Shaping Mode: Injection Mould
Surface Finish Process: Polishing, Texture, Customized
Mould Cavity: Single & Multi Cavity
Plastic Material: PC, PA, POM, ABS, PE, PP etc. Selected as Per Appl
Process Combination Type: Single-Process Mode
Application: Household Appliances, Commodity, Home Use


US$ 0/Piece
1 Piece(Min.Order)

Request Sample


US $1-9
/ Piece
1,000 Pieces

(Min. Order)


Shaping Mode: Injection Mould
Surface Finish Process: Polishing, Texture, Customized
Mould Cavity: Single & Multi Cavity
Plastic Material: PC, PA, POM, ABS, PE, PP etc. Selected as Per Appl
Process Combination Type: Single-Process Mode
Application: Household Appliances, Commodity, Home Use


US$ 0/Piece
1 Piece(Min.Order)

Request Sample



Injection Molded Parts – Design Considerations

If you want to produce high-quality Injection molded parts, there are several factors to consider before the design process. These factors include the Surface finish, Material compatibility, and Tooling fabrication. This article will focus on some of these factors. Ultimately, you can save time and money by designing the parts in-house.

Design considerations

Injection molded parttWhen creating a new part, or updating an existing part, design considerations for injection molded parts are critical. The decisions you make in these early stages of development can have a profound effect on the final product, and they can also have substantial cost and timing implications. In this guide, we’ll explore key design considerations, including how to maximize the efficiency of the injection molding process. We’ll also touch on how to optimize gate placement and parting lines.
To ensure a successful injection molding process, part design must balance structural integrity and plastic fill volume. This means creating parts with relatively thin walls that have adequate support and avoid warping or sinking. To do this, injection molded parts often feature ribs or projections to strengthen the walls. However, too thin of a wall can result in excessive plastic pressure and air traps.
One of the most important design considerations for injection molded parts is the direction of the parting line. For many applications, a parting line is obvious, but for others it’s a little less obvious. The first step in designing an injection mold is to determine which direction it should open.
Another critical design consideration is the part’s ejection. If a part isn’t ejected properly, it will stick to the mold. A part that has too many undercuts or ribs will end up stuck on the mold’s side, making it difficult to eject it from the mold. A part that has a draft angle of at least five degrees is much easier to eject.
Another important design consideration for an injection molded part is the type of plastic used. Some plastics do not tolerate undercuts. However, some materials are able to tolerate undercuts of up to five percent. Undercuts are not ideal and can increase the complexity and cost of the injection mold.
Another design consideration for injection molded parts is the radius of edges. Sharp corners can create high molded-in stresses and can lead to failure points. A radius eliminates this stress by redistributing the stress more evenly throughout the part. This also facilitates flow of the material through the mold.

Surface finish

Injection molded parts are often finished with additional processing in order to improve their aesthetic quality. There are a variety of finishing processes, including machining and sanding, which give injected molded parts a particular look, feel, or texture. The surface finish of a plastic part affects both its aesthetics and its functionality. According to the Society of Plastics Industry, certain standards for surface finish are essential to the aesthetics and durability of plastic parts.
Surface finish of injection molded parts depends on the primary design goal. For instance, some designs may need a part to be aesthetically pleasing while others may want to enhance its functionality. Surface texture is often used by designers and engineers to achieve different aesthetic goals, such as improving the product’s perceived value. A textured surface may also help hide imperfections and improve the part’s non-slip qualities.
Surface finish is a critical aspect of plastic injection molding. It can affect material selection, tooling, and other process decisions. It is important to determine the desired surface finish early in the design phase. A skilled plastic injection molder can assist you in making this decision. In addition to determining the finish you need, a skilled molder can help you decide the best material for the job.
The PIA classification system defines four basic grades for surface finish. There are subcategories for each grade. Group A surface finish is smooth, and grade B and C finishes are textured. The former is the most common and economical finish and is most suitable for industrial parts. It can hide deformations and tooling marks, and is the least expensive finish type.
Surface finish of injection molded parts can vary greatly, and can be crucial to the performance and appearance of the part. Some companies prefer plastic parts with a glossy finish, while others prefer a textured surface for aesthetic reasons. While the former may be better for aesthetic purposes, rougher surfaces are often preferred for functional or mechanical parts.

Material compatibility

Injection molded parttMaterial compatibility is important for the durability of your injection molded parts. You can use multiple materials in the same part by mixing resins. This is an ideal solution for parts that require adhesion, friction, or wear. Fast Radius can simplify the material selection process, optimize part design, and speed up production.
ABS is a thermoplastic polymer that can withstand a range of temperatures. Its low melting point means that it is easy to mold, and it has good chemical and moisture resistance. ABS also has good impact strength, and is highly durable. It is easy to recycle. Nylon is another versatile material for injection molding. It can be used for car tires, electrical components, and various apparel.
When choosing the material for your injection molded parts, keep in mind that the type of resin will determine their tolerance. Injection molding is compatible with a wide range of plastic resins. Some materials are more suitable than others for certain applications, and many plastics can be modified with stabilizers or additives to improve their properties. This flexibility allows the product development team to customize materials to achieve the performance characteristics they desire.
Polyamides are another great option for injection molding parts. Both natural and synthetic varieties of these plastics have excellent properties. However, they have some drawbacks. For instance, nylon injection molding is difficult and can result in inadequate filling. However, Nylon injection molding has many benefits, including high impact resistance and heat resistance.
Polybutylene terephthalate (PBT) is a high-molecular-weight polymer with excellent mechanical and chemical resistance. It is a good choice for components in the medical, automotive, and lighting industries. Its low water absorption and low flammability make it suitable for many applications.
Polyurethane (TPU) is another polymer option. It has excellent resistance to abrasion, chemicals, greases, and oils. It also has high temperature resistance, and is suitable for ozone environments. However, TPU is more expensive than TPE and requires drying before processing. Moreover, it has a short shelf life.

Tooling fabrication

Injection molded parttTooling fabrication for injection-molded parts is an important component of the manufacturing process. The right design of the mold can reduce the cost and time required for a finished product. For instance, choosing the right type of core for the mold can reduce the amount of material used in the part, which is necessary to produce a high-quality product. It is also important to choose a design that is easy to mill into a mold.
Injection molding requires a mold with precise geometries. The mold tool must be constructed accurately and carefully to achieve the desired precision. It can be the biggest investment in the manufacturing process, but it is also critical to the success of a project. Large volume and high-precision parts often require more complex tooling, as they require the highest level of precision.
Tool steels typically used for injection moulding include H-13 and 420 stainless steel. Both of these materials are strong enough to produce parts of comparable hardness to wrought parts. These materials have low elongation values, so they are ideal for constructing injection moulding tools. Some of these steels also have excellent dimensional accuracy and are ideally suited for high-precision tool fabrication.
The process of plastic injection molding requires precise measuring and tooling fabrication. The mold must have the proper lead angle and space for the material to deform. Undercuts must be no larger than 5% of the diameter. Moreover, the injection molded part should be free of stripping or undercuts. Ideally, it should have a lead angle of 30o to 45o.
Various plastics can be used in the process of injection molding. The process can be used to produce cosmetic and end-use parts. Materials used in the molding process include silicone rubber and thermoplastics. If the part requires additional reinforcement, it can be reinforced with fibers, mineral particles, or flame retardant agents.
Increasingly advanced technologies have streamlined the process of tooling fabrication for injection moulded parts. The process has improved with the use of computer aided design, additive manufacturing, and CNC lathes. Approximately 15% of the cost of a finished injection molded part is spent on tooling fabrication.
China Plastic Injection Molded Spare Parts for Intelligent Water Meter     an injection molded partsChina Plastic Injection Molded Spare Parts for Intelligent Water Meter     an injection molded parts
editor by czh 2023-01-20